• The MC JETMILL® 150 is the latest fluid jet mill developed and marketed by JETPHARMA GROUP. It is the "smallest" production fluid jet mill of the MC JETMILL® range and combines: the ergonomics and the easy and rapid cleaning of the laboratory MC JETMILL® with the capacity and the productivity of the production MC JETMILL®.
  
• The MC JETMILL® 150 can be equipped with a smaller filtering sleeve and it is possible to reduce the cyclone's dimension in order to be placed inside our existing JETPHARMA GROUP glove box.
  
• This new possibility offered by the MC JETMILL® 150, allows to retro-fit inside the same glove box the MC One®, or the MC JETMILL® 50 or the MC JETMILL® 150 according to the different production requirements during the whole life cycle of the developing products, thus optimising the investment - through the purchase of one glove box only.
  
• HIGH GRADE MATERIALS - AISI type 316L stainless steel mirror polished to Ra 0.25 microns.
  
• RAPID CLEANING AND EASY VALIDATION - easiness in assembling and disassembling, limited number of components.
  
• SIMPLICITY OF WHOLE UNIT - total absence of screws (replaced by tri-clamp connections), no crevices, smooth and regular surface.
  
• VERY LOW PRODUCT LOSS - typical yields are 99.5% of batch size.
  
• ELIMINATION OF BLOW-BACK PHENOMENON.
  
• LIMITED CAKING in sticky product.
  
• DIMENSIONAL HOMOGENEITY - thanks to the "one single collecting point"
  .
• LOWER CONSUMPTION OF PROCESS GAS in comparison with similar units.
  
• PROCESS AT CONSTANT TEMPERATURE - ENDOTHERMIC - no heat generation.
  
• EASY SCALE UP maintaining the same PSD (Particle Size Distribution)

Standard MC JETMILL® 150 Pharma Execution

• Upper and lower plates, central nozzles ring, closed by a single tri-clamp connection.
  
• Cyclone filter provided with antistatic polyester filter sleeve.
  
• Butterly valve.
  
• Pneumatic shaking system.
  
• Tee connection in AISI 316L.
  
• Supporting table with two manometers, one thermometer, two ball process valves, one emergency push-button, one main valve Start/Stop, one pressure switch for the main pressure line and one push-button for pneumatic filter shaking.
  
• Volumetric pharma execution feeder with 10 litres capacity
• Cyclone filter provided with antistatic polyester filter sleeve.
  
• 1 lt product collecting bin
  
• Cyclone filter provided of polyester anti-static filter sleeve
  
• Shaking system
  
• Supporting table with two manometer, one thermometer, and two ball process valves
  
• Final filtering unit with pre-filter, semi absolute, absolute Hepa filter (99.997% efficiency), controlled by a frequency inverter
  
• Anti-stati swivel-castors

Options

• Various feeder hopper and lid hopper dimensions.
  
• Special internal lining -PTFE, Polymer, Ceramic, Hastelloy.
  
• Membrane process valve, with point of use sterile filter.
  
• Balance line (for the hermetical sealing of the unit).
  
• Laminar flow cabinet (horizontal flow) for the process equipment to avoid dust dispersion and operators exposure.
  
• Cryogenic version including special equipment.
  
• Glove Box version.
  
• Atex version.